DG Series
picture_as_pdfDownload Tech Specs
DG 50 PN
The DG 50 PN industrial vacuum cleaner is ideal for picking up dry dust, which in normal working conditions, can clog the filter and impair the machine’s ability to collect fine dusts (the PN system is the ideal solution for dust from building work, cement factories, surface treatments). The DG 50 PN is equipped with high surface area filter cartridges that are automatically and systematically cleaned by a reverse pulse filter cleaning system, enabling the operator to keep the vacuum cleaner on a continuous cycle until the container is completely full.
Available in ATEX Certified Version (Zone 22)
For more innovations associated with this model, see “related products” section below.
Technical Features
Industrial Applications
- Compact and portable
- Constructed with powder coated steel
- Side channel blower (continuous use / no maintenance up to 30,000 hours)
- Removable collection tank
- Pressure relief valve
- Control Panel
- Oil-free compressor
- Pneumatic reverse pulse cleaning system
Tech Data Sheet
Product Brochure
| Technical Data | DG 50 PN | |
|---|---|---|
| Voltage | V - Hz | 460 - 60 3~ |
| Power | HP (kW) | 6.2 (4.6) |
| Electrical Protection | IP Class | 55 |
| Continuous Water Lift | inH20 (mmH2O) | 104.3 (2650) |
| Max Airflow | CFM (m³/h) | 294.3 (500) |
| Suction Inlet | in. (mm) | 3 (80) |
| Capacity | Gal. (L) | 26 (100) |
| Noise Level (EN ISO 3744) | dB(A) | 70 |
| Dimensions (WxLxH) | in. (cm) | 26x46x74 (66x118x187) |
| Weight | lb. (kg) | 320 (145) |
| Primary Filter Type | Cartridge (3) | |
| Material - Efficiency | IEC 60335-2-69 | Antistatic Polyester - Class M |
| Filter Surface Area | ft² (m²) | 61 (5.7) |
| Air load on filter | ft/min (m/h) | 4.8 (74) |
| Cleaning system | Automatic Pneumatic |
Related Products
Innovative Solutions to Increase Efficiency
