DG Series

DG 70 PN

The DG 70 PN industrial vacuum cleaner is ideal for picking up dry dust, which in normal working conditions, can clog the filter and impair the machine’s ability to collect fine dusts (the PN system is the ideal solution for dust from building work, cement factories, surface treatments). The DG 70 PN is equipped with high surface area filter cartridges that are automatically and systematically cleaned by a reverse pulse filter cleaning system, enabling the operator to keep the vacuum cleaner on a continuous cycle until the container is completely full.

Available in ATEX Certified Version (Zone 22)

For more innovations associated with this model, see “related products” section below.

picture_as_pdfDownload Tech Specs
Technical Features

Industrial Applications

  • doneCompact and portable
  • doneConstructed with powder coated steel
  • doneSide channel blower (continuous use / no maintenance up to 30,000 hours)
  • doneRemovable collection tank
  • donePressure relief valve
  • doneControl Panel
  • doneOil-free compressor
  • donePneumatic reverse pulse cleaning system

Tech Data Sheet

Product Brochure

Technical Data DG 70 PN
Voltage V - Hz 230/460 - 60 3~
Power HP (kW) 8.4 (6.3)
Electrical Protection IP Class 55
Continuous Water Lift inH20 (mmH2O) 110.2 (2800)
Max Airflow CFM (m³/h) 353.1 (600)
Suction Inlet in. (mm) 3 (80)
Capacity Gal. (L) 26 (100)
Noise Level (EN ISO 3744) dB(A) 75
Dimensions (WxLxH) in. (cm) 26x46x74 (66x118x187)
Weight lb. (kg) 397 (180)
Primary Filter Type Cartridge (3)
Material - Efficiency IEC 60335-2-69 Antistatic Polyester - Class M
Filter Surface Area ft² (m²) 86 (8)
Air load on filter ft/min (m/h) 4.1 (66)
Cleaning system Automatic Pneumatic
picture_as_pdf Download Technical Datasheet
Related Products

Innovative Solutions to Increase Efficiency

DG 70

The DG 70 industrial vacuum system is the ideal solution for picking u...

View Product