DG VL SE Series


The DG VL 150 SE PN industrial vacuum system is an armored three-phase vacuum for large volumes of dry powder. For maximum performance, an automatic reverse pulse system uses compressed air to clean the filter cartridges in one continuous cycle.

For more innovations associated with this model, see “related products” section below.

picture_as_pdfDownload Tech Specs
Technical Features

Industrial Heavy Material Extraction

  • doneCompact and portable
  • doneConstructed with powder coated steel
  • done2-stage side channel blower (continuous use / no maintenance up to 30,000 hours)
  • doneRemovable collection tank
  • doneFork lift intakes and ring bolt
  • donePerformance indicator light
  • donePressure relief valve
  • doneLarge filter surface
  • doneControl Panel
  • donePneumatic reverse pulse cleaning system
Watch the Video

Tech Data Sheet

Product Brochure

Technical Data DG VL 150 SE PN
Voltage V - Hz 460 - 60 3~
Power HP (kW) 23.2 (17.3)
Electrical Protection IP Class 65
Continuous Water Lift inH20 (mmH2O) 212.6 (5400)
Max Airflow CFM (m³/h) 494.4 (840)
Suction Inlet in. (mm) 5 (120)
Capacity Gal. (L) 42 (160)
Noise Level (EN ISO 3744) dB(A) 78
Dimensions (WxLxH) in. (cm) 74x30x79 (188x77x200)
Weight lb. (kg) 485 (220)
Primary Filter Type Cartridge (4)
Material - Efficiency IEC 60335-2-69 Antistatic Polyester - Class M
Filter Surface Area ft² (m²) 114 (10.6)
Air load on filter ft/min (m/h) 4.3 (68)
Cleaning system Automatic Pneumatic
picture_as_pdf Download Technical Datasheet
Related Products

Innovative Solutions to Increase Efficiency

DG VL 150 SE

The DG VL 150 SE industrial vacuum system is a portable three-phase v...

View Product